MasonrySaver® VOC Compliant Solvent Base Water Repellent is an effective, penetrating water repellent in a mineral spirits carrier designed to protect above-grade masonry surfaces.

 It is designed to penetrate deeply in to most masonry and concrete pores and can be used as a clear sealant for brick and cement patios, a driveway sealer to water proof concrete, or other vertical and horizontal masonry surfaces.

This VOC compliant silane/siloxane product comes with a 7 year warranty when applied to vertical surfaces. It can be used to retreat previously waterproofed surfaces as well.

Long-lasting Water Repellent Protection
Other waterproofing sealers form a film on the surface and trap water vapors, VOC Compliant Solvent Base Water Repellent allows deep penetration of its active ingredient of up to 1/4 inch or more. As a result, the special siloxanes in VOC Compliant Solvent Base Water Repellent react to form strong chemical bonds beneath a treated surface. These bonds allow the product to become a physical part of the structure and provide long-lasting water repellent protection without altering the surface appearance.

 100% Breathable Protection
Moisture, from either internal or external sources, is usually present in masonry and concrete. Film-forming sealers and silicone coatings form a water resistant surface that traps water vapors inside. If these vapors cannot escape, they will contribute to spalling, scaling, deterioration and freeze-thaw damage. VOC Compliant Solvent Base Water Repellent is 100% vapor permeable, a non film-forming water repellent that penetrates and lines masonry and concrete pores.

Ideal for previously treated surfaces
With its mineral spirits base, VOC Compliant Solvent Base Water Repellent is an ideal maintenance product for previously treated surfaces as the mineral spirits carrier will allow the product to bond with surfaces that have previously been waterproofed. It can also be applied over siliconized acrylic concrete stains.

Masonry Waterproofing Applications
VOC Compliant Solvent Base Water Repellent is an extremely versatile product that can be used on most vertical or horizontal exterior, above-grade masonry surfaces including:

• Adobe
• Architectural Concrete - precast or cast in place
• Clay brick
  
• Mortars
• Natural Stone
  
• Limestone
• Granite
  
• Sandstone
  
• Terra Cotta
  
• Exposed Aggregate Products
  
• Portland Cement Stuccos
  
• Concrete Driveways
• Sidewalks
  
• Patios
  

(New masonry should be cured for a period of not less than 14 days.)

• So far, the states that have adopted these new standards include California, Connecticut, Delaware, Illinois, Washington D.C., Maine, Massachusetts, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont and Virginia (only in the counties of Arlington, Fairfax, Prince William, Stafford and Loudon).
• MasonrySaver VOC Compliant Solvent-Base Water Repellent can be used on most vertical or horizontal exterior, above-grade masonry surfaces including: Adobe; Architectural concrete, precast or cast-in-place; Clay Brick; Mortars; Natural Stone; Limestone; Granite; Sandstone; Terra Cotta; Exposed Aggregate Products; Portland Cement Stuccos and Concrete Masonry Units.
• It is an ideal maintenance product for previously treated surfaces. It can be applied over siliconized acrylic concrete stains. Natural substrate color and surface textures are unaffected, with little or no gloss created, however, overapplication can cause substrate darkening. Slight darkening may occur on some adobe, limestone, or very dense surfaces. Testing is recommended before treating any surface to ensure desired results.
• Surfaces treated with MasonrySaver VOC Compliant Solvent-Base Water Repellent may be painted with many oil-base paints. Testing is always necessary to ensure adhesion and compatibility. Note: Painting over MasonrySaver VOC Compliant Solvent-Base Water Repellent substantially reduces the vapor permeability of the product.

Available Sizes: 1 gallon Recyclable Containers
Coverage Rate: (Sq. Ft. per Gallon)
Brick: 90-150
Block: 40-80
Concrete: 75-125
Stucco: 60-100
Limestone: 80-120
Adobe: 90-110
Granite: 500-700
Application Temperatures: Minimum 40 degrees F
Application Method: Low-pressure Sprayer
Dry Time: 1 - 2 hours (allow 4 hours before rainfall)
Cleanup: Mineral Spirits